10 January 2012
Konvision KVM-2250W
Konvision KVM-2250W; 22″ Full HD Broadcast Monitör
22″ High Brightness LCD panel
1920×1200 FullHD çözünürlük
3GHD/HD/SD-SDI giriş desteği
2 SDI giriş, 1SDI çıkış, DVI/HDMI/VGA giriş, Composite/Component giriş-çıkış
PIP/PBP fonksiyonu ile aynı anda çift görüntü desteği,
Masa üstü veya duvara askı montaj imkanı
| Product Brief Introduction22″ Full HD LED Backlight LCD monitor, wide viewing angles
Support all SDI versions: 3G-SDI, HD-SDI, SD-SDI All signals connections: 2 SDI in, 2 SDI out, DVI/HDMI/VGA in, Composite in/out, Component in/out, RS485/RS232 Remote control/GPI
Advanced features: 2 SDI PIP/PBP, 8ch Embedded audio, Waveform, Vectorscope, Histogram, RGB Histogram, Pixel Measure, Focus Assist, False Color, Zebra, Picture Flip, UMD, Fast Mode, H/V delay, RGB gain and offset setting. AC in power supply, and optional with battery plate |
||
| High Brightness LCD Pannel | Auto Detect Color Format | 3D Video Decoder |
| Image Size Settings | 10 Bit Signal Process | Color Temperature settings |
| PIP/PBP for 2 HD/SD-SDI display | Waveform (YCbCr) | Vectorscope |
| Pixel Measurement | Histogram/RGB Histogram | Focus Assist |
| SDI Embedded Audio meter Display (VU+PPM) | YCbCr Waveform | Support 3G/HD-SDI Input |
| Picture Flip | False color/ Zebra | UMD |
| Fast Mode | H/V Delay | SWAP Function |
| Compatible SDI Formats | ||
| ITU?R BT.656 | 576i(50) | |
| SMPTE-125M | 480i(59.94) | |
| SMPTE-274M | 1080i(60/59.94/50)1080P(30/29.97/24/25/23.98) | |
| SMPTE-260M | 1035i(60/59.94) | |
| SMPTE-296M | 720P(60/59.94/50/30/29.97/25/24/23.98) | |
| SMPTE-425M | 1080P(60/59.94/50) | |
| Specifications and Features | ||
| Model Number | KVM-2250W | |
| Display Size | 22″ | |
| Resolution | Full HD 1920×1080 | |
| Aspect Ratio | 16:9 | |
| Wide Viewing Angle | H: 178 degree / V: 178 degree | |
| Pixel Pitch | 0.248×0.248(mm) | |
| Color Depth | 16.7M | |
| Response time | 5ms | |
| Brightness | 300cd/? | |
| Backlight | White LED | |
| Contrast Ratio | 1000:1 | |
| Video input/output | 1×BNC | |
| Y/C input/output | 2×BNC | |
| Component(YPbPr/YCbCr/RGB) In/Out | 3×BNC(Support 1080p) | |
| HDMI/DVI/VGA | HDMI/DVI/VGA Input | |
| 2x 3G/HD/SD-SDI Inputs and 2x Output | 3G/HD/SD-SDI Auto-Detected | |
| SDI Audio Embedded | 8 Channel audio Disembedded | |
| Audio Meter Display(VU+PPM) | Display Volume Level Meter | |
| Analog Audio Input | 3.5mm Headset Switch Cable | |
| Audio Headset Output | 3.5mm Headset Jack | |
| Built-in Speaker | 2.5W×2 | |
| Remote Control/GPI | RS-485/ RS-232 | |
| Color System | PAL/NTSC/SECAM (Auto-Detected) | |
| Dual Pictures (PIP/PBP) for 2 SDI | PIP Pictures? Sizes and Positions are adjustable; | |
| Two Pictures Swap | Two Pictures in rapid Swap | |
| Color Temperature | 9300K, 6500K, 5600K, User | |
| Marker Settings | Center Marker, Aspect Ratio Marker, Safety area,Mat(white,black,gray,translucency) | |
| Waveform | Display YCbCr waveform values | |
| Vector scope | Display Vectorscope values | |
| Histogram | Real-time analysis of single-frame luminance distribution | |
| RGB Histogram | Real-time analysis of single-frame RGB distribution | |
| Pixel Measure | select any single pixel or block of pixels using a movable cross hair to obtain real time readouts of the YRGB values for that position | |
| False Color | aid in the setting of camera exposure | |
| Focus Assist | aid the camera operator in obtaining the sharpest possible picture | |
| UMD | support TSL V3.1 and user can input any text | |
| Zebra | aid in setting the correct exposure | |
| Picture Flip | The signal picture that are shot is horizontally reversed for normal viewing | |
| Fast Mode | Minimize the delay time, interlaced scanning without converting into progressive scan | |
| B/W Select Mode | Y | |
| Blue Screen Mode | Y | |
| H/V Delay | H/V and Blank Region Area Display | |
| Zoom in | Any part image can be selected freely; x9 zoom in | |
| Scan Mode | Full scan / Over Scan | |
| Image Size Settings | 16:9 /4:3 /Full Screen /Graphic Ratio / 1:1 (Point to Point) | |
| TALLY | High-Light LED Signal Indicator | |
| Operating Temperature | -10??50? | |
| Input Voltage | AC:100-240V 50/60Hz | |
| Power Consumption | 33W | |
| Power-Saving Mode | Turn off unimportant Key Automatically during No Signal Input | |
| 19″ Rack Accessories | / | |
| VESA Installation | VESA MIS-D(100X100mm) | |
| Desktop Stand | Y | |
| Unit Dimension | L530×H350×W54(mm) | |
| Net weight | 7kg | |
| Packing Dimension | 655x221x500mm | |
| Gross Weight(Include all) | 9KG | |
| Shell Materials | Aluminum on Front-Shell/Base Supporter/Rust-Proof iron on Back-Shell | |
| Accessories | Power Cord / Fastening screws / Manual | |
fiyat alabilirmiyim
Sorunuz yanıtlanmıştır. Teşekkür ederiz.
fiyat alabilirmiyim